Veris-technologies Quad 1000 Soil EC Mapping System - Operating Instr Manual do Utilizador descarregar pdf (Página 11)

OM17-Quad1000

3-2

NOTE: Depending on shipping configuration, the unit may need additional assembly. Attach

wheels as shown in Figure 3. Attach raise-lower crank bracket as shown in Figure 4.

Figure 3 Figure 4

Attach raise/lower crank to disk electrode toolbar by threading crank rod into trunion as shown in

Figure 5. Do not attach disk electrode toolbar to frame before crank rod is attached.

Figure 5

Connect the disk-electrode sub-assembly and wiring harness as shown in Figure 6.

Figure 6a and 6b

Attach disk electrode toolbar

with 5/8” Pin and Bowtie clip.

Attach wheels with ½” X 2.75”

bolts with lock washer and

nut.

Attach raise/lower crank rod

by threading rod through

trunion

Install raise-lower crank

bracket with ½” X 3.75” bolts

with lock washer and nut.

Attach wiring harness with #6

machine screws and lock

nuts.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 42 43

Sem comentários

Veris-technologies Quad 1000 Soil EC Mapping System - Operating Instr Manual do Utilizador Página 11